RP/0/0/CPU0:XR3#show run Sun Jan 21 22:42:16.515 UTC Building configuration... !! IOS XR Configuration 6.1.2 !! Last configuration change at Sun Jan 21 22:30:01 2018 by cisco ! hostname XR3 logging console debugging logging buffered debugging service timestamps log datetime msec service timestamps debug datetime msec line console exec-timeout 0 0 transport preferred none ! interface Loopback0 ipv4 address 10.0.0.33 255.255.255.255 ipv6 address fc00::10:0:0:33/128 ! interface Loopback10 description NETCONF_LOOPBACK ipv4 address 10.0.1.33 255.255.255.255 ipv6 address fc00::10:0:1:33/128 ! interface MgmtEth0/0/CPU0/0 shutdown ! interface GigabitEthernet0/0/0/0 carrier-delay up 0 down 0 load-interval 30 ! interface GigabitEthernet0/0/0/0.13 ipv4 address 10.11.33.33 255.255.255.0 ipv6 address fe80::33 link-local ipv6 address fc00::10:11:33:33/112 encapsulation dot1q 13 logging events link-status ! interface GigabitEthernet0/0/0/0.23 ipv4 address 10.22.33.33 255.255.255.0 ipv6 address fe80::33 link-local ipv6 address fc00::10:22:33:33/112 encapsulation dot1q 23 logging events link-status ! interface GigabitEthernet0/0/0/0.34 ipv4 address 10.33.44.33 255.255.255.0 ipv6 address fe80::33 link-local ipv6 address fc00::10:33:44:33/112 encapsulation dot1q 34 logging events link-status ! interface GigabitEthernet0/0/0/0.999 description Management ipv4 address 192.168.1.111 255.255.255.0 encapsulation dot1q 999 logging events link-status ! netconf-yang agent ssh ! ssh server v2 ssh server vrf default ssh server netconf vrf default end