cumulus@VX4:mgmt-vrf:~$ net show configuration

frr version 4.0+cl3u2

frr defaults datacenter

hostname VX4

username cumulus nopassword

service integrated-vtysh-config

log syslog informational

vrf VM8
  ip route 0.0.0.0/0 192.168.8.250

router bgp 65001
  bgp router-id 10.0.0.44
  neighbor POD1 peer-group
  neighbor POD1 remote-as external
  neighbor POD1 bfd
  neighbor POD1 password FABRIC
  neighbor POD2 peer-group
  neighbor POD2 remote-as external
  neighbor POD2 bfd
  neighbor POD2 password FABRIC
  neighbor 10.11.44.11 peer-group POD1
  neighbor 10.22.44.22 peer-group POD2

  address-family ipv4 unicast
    network 10.0.0.44/32

  address-family l2vpn evpn
    neighbor POD1 activate
    neighbor POD2 activate
    advertise-all-vni
    advertise-default-gw

line vty

snmp-server
  listening-address localhost

dns

  nameserver
    10.20.249.1

ptp

  global

    slaveOnly
      0

    priority1
      255

    priority2
      255

    domainNumber
      0

    logging_level
      5

    path_trace_enabled
      0

    use_syslog
      1

    verbose
      0

    summary_interval
      0

    time_stamping
      hardware

interface lo
  # The primary network interface
  address 10.0.0.44/32
  address fc00::10:0:0:44/128

interface eth0
  address 192.168.44.92/24
  vrf mgmt

interface swp1
  address 10.11.44.44/24

interface swp2
  address 10.22.44.44/24

interface swp3
  bridge-vids 888

interface VM8
  vrf-table auto

interface bridge
  bridge-ports swp3
  bridge-vids 888
  bridge-vlan-aware yes

interface mgmt
  address 127.0.0.1/8
  vrf-table auto

interface vlan888
  address 192.168.8.2/24
  vlan-id 888
  vlan-raw-device bridge
  vrf VM8

time

  zone
    Etc/UTC

  ntp

    servers
      0.cumulusnetworks.pool.ntp.org iburst
      1.cumulusnetworks.pool.ntp.org iburst
      2.cumulusnetworks.pool.ntp.org iburst
      3.cumulusnetworks.pool.ntp.org iburst

    source
      eth0

dot1x
  mab-activation-delay 30
  eap-reauth-period 0

  radius
    accounting-port 1813
    authentication-port 1812





cumulus@VX4:mgmt-vrf:~$ net show configuration commands
net del all
net add routing defaults datacenter
net add routing service integrated-vtysh-config
net add routing log syslog informational
net add bgp autonomous-system 65001
net add bgp router-id 10.0.0.44
net add bgp neighbor POD1 peer-group
net add bgp neighbor POD1 remote-as external
net add bgp neighbor POD1 bfd
net add bgp neighbor POD1 password FABRIC
net add bgp neighbor POD2 peer-group
net add bgp neighbor POD2 remote-as external
net add bgp neighbor POD2 bfd
net add bgp neighbor POD2 password FABRIC
net add bgp neighbor 10.11.44.11 peer-group POD1
net add bgp neighbor 10.22.44.22 peer-group POD2
net add bgp ipv4 unicast network 10.0.0.44/32
net add bgp l2vpn evpn  neighbor POD1 activate
net add bgp l2vpn evpn  neighbor POD2 activate
net add bgp l2vpn evpn  advertise-all-vni
net add bgp l2vpn evpn  advertise-default-gw
net add snmp-server listening-address localhost
net add dns nameserver ipv4 10.20.249.1
net add ptp global slave-only no
net add ptp global priority1 255
net add ptp global priority2 255
net add ptp global domain-number 0
net add ptp global logging-level 5
net add ptp global path-trace-enabled no
net add ptp global use-syslog yes
net add ptp global verbose no
net add ptp global summary-interval 0
net add ptp global time-stamping
net add bridge bridge ports swp3
net add bridge bridge vids 888
net add bridge bridge vlan-aware
net add interface eth0 ip address 192.168.44.92/24
net add interface eth0 vrf mgmt
net add interface swp1 ip address 10.11.44.44/24
net add interface swp2 ip address 10.22.44.44/24
net add interface swp3 bridge vids 888
net add loopback lo ip address 10.0.0.44/32
net add loopback lo ipv6 address fc00::10:0:0:44/128
net add vlan 888 ip address 192.168.8.2/24
net add vlan 888 vlan-id 888
net add vlan 888 vlan-raw-device bridge
net add vlan 888 vrf VM8
net add vrf mgmt ip address 127.0.0.1/8
net add vrf mgmt,VM8 vrf-table auto
net add hostname VX4
net add time zone Etc/UTC
net add time ntp server 0.cumulusnetworks.pool.ntp.org iburst
net add time ntp server 1.cumulusnetworks.pool.ntp.org iburst
net add time ntp server 2.cumulusnetworks.pool.ntp.org iburst
net add time ntp server 3.cumulusnetworks.pool.ntp.org iburst
net add time ntp source eth0
net add dot1x radius accounting-port 1813
net add dot1x eap-reauth-period 0
net add dot1x radius authentication-port 1812
net add dot1x mab-activation-delay 30
net commit

# There are some configuration commands that are not yet supported by nclu.
# The following will append those commands to the appropriate files.
# ========================================================================
sudo printf 'username cumulus nopassword\n' >> /etc/frr/frr.conf
sudo printf 'vrf VM8\n  ip route 0.0.0.0/0 192.168.8.250\n' >> /etc/frr/frr.conf