SP. Part 2. EVPN (L2 multipoint) over Segment Routing with Arista, Cisco, Nokia

Anton Karneliuk. IT & Network Expert / Architect / Manager; Project Manager; Entrepreneur; 2x CCIE (RS/SP) #49412; MSc Telecommunications.

Leave a Reply to stploop Cancel Reply

Comment as a guest.

  1. I seems to have problem sending (imposing) label packets from vEOS device. Did you have the same problem? Appreciate your feedback!!

  2. Anyone has an idea why I cannot ping between hosts on Arista and IOS XR (ASR 9K), can ping if they are between arista vs arista or IOS-XR vs IOS-XR. I do see the mac addresses in BGP though, but ping or ARP does not work.

    1. Hey Pavel,

      the were some issues on the way how Arista implements EVPN over MPLS. There are three options how VTEP could be implemented (IP address, ip unnumbered, interface-less). Make sure that on both sides you have the same type.

      Cheers,
      Anton

  3. HI Anton,
    your posts are great!
    I have make an lab with 4 Arista and 1 Juniper MX204 all works fine expect the TI-LFA. When make the link fault test between Juniper and Arista make an microloop and lost the traffic for 1 sec.

Read Next

Sliding Sidebar